Motech FG710

DDS FUNCTION GENERATOR FG 710F / 720F
	Key Features General Specifications Specifications Download PDF brochure Manual PDF PPT presentation (2,6 Mb)	Key Features
		Direct Digital Synthesis Multi-Function Generator Ultra Low Distortion and Low Noise Even In 1mV peak Signal Output Digital Setting of Linear and Log Sweep Function Rotary Push Trigger and Gate Function Output Frequency / Amplitude / DC offset / Pulse Width Monitoring FSK and PSK Modulation External and Internal AM / FM Modulation (FG 710F/720F) Digital Setting Pulse Generator with Duty Cycle Display (FG 710F/720F) 20KHz Ramp Up and Ramp Down Function (FG 710F/720F) Build in 100MHz Intelligent Frequency Counter and External Duty Cycle Measurement(FG 710F/720F)
	General Specifications
	Power Source: Operation Environment: Dimension: Weight:	AC 115V / 230V (inner switch able) ±10%, 50/60Hz 0ºC to 40ºC, relative humidity below to 80%, Storage temperature -20ºC to 70ºC 280mm x 235mmx 95mm (11" x 9.25" x 3.74") (DxWxH) 3 kg

Specifications
	Model	FG 708S	FG 708F	FG 710F/720F
	Output waveforms Frequency range	Sine, Square, Sync output, Pulse : 100mHz ~ 8MHz Triangle :100mHz ~ 1MHz DC	Sine, Square, Sync output, Pulse : 100mHz ~ 8MHz Triangle :100mHz ~ 1MHz Ramp Up, Ramp Down : 100mHZ ~ 20KHz DC	Sine, Square, Sync output, Pulse : 100mHz ~ 10MHz Triangle :100mHz ~ 1MHz Ramp Up, Ramp Down : 100mHZ ~ 20KHz DC: ±10V at open-circuit, ±5V at 50W load
	Frequency Resolution	100mHz or 6 digits display
	Output impedance	50W ± 5%
	Amplitude	1mV to 20Vp-p (open-circuit), 0,50mV to 10Vp-p (into 50W load)
	Resolution	2 ~ 3 digits, 1mV min (depend on attenuation)
	Accuracy	Typical 1% test at 1KHz 9Vp-p sine @ 50W load
	Output attenuation	0 db, -20 db, -40 db, -60 db
	FUNC_OUT self protection	FUNC_OUT short circuit protection Reverse voltage protection below 20 Vpeak
	DC_offset and DC output	± 10 V at open-circuit, ± 5 V at 50W load
	Resolution	2 digits, +/- 1mV min (depend on attenuation)		3 digits, +/- 1mV min (depend on attenuation)
	Accuracy	1% ± 5 counts at DC Mode
	Sine wave Harmonic Distortion	DC to 100KHz < -55 dBc typical 100KHz to 1MHz < -45 dBc typical 1MHz to 8MHz < -35 dBc typical		DC to 100KHz < -55 dBc typical 100KHz to 1MHz < -45 dBc typical 1MHz to 10MHz/20MHz < -35 dBc typical
	Spurious (non harmonic)	DC to 1MHZ < -55 dBc typical
	Total harmonic distortion	DC to 100KHz < 0,3%
	Square wave	rise / fall time < 12nS for 10Vpp @ 50W load overshoot < 5% of Vp for 10Vpp @ 50W load
	Pulse	Frequency range : 1mHz to 8MHz Amplitude : 0 to 10V / 0 to -10V / +/- 10 V Duty cycle : 1mHz to 5MHz : 20% to 80%; 5MHz to 8MHz : 40% to 60%		Frequency range : 200mHz to 20MHz Amplitude : 0 to 10V / 0 to -10V / ± 10 V Duty cycle : 200mHz to 20MHz : 0.1% to 99.9%; 20MHz to 200MHz : 2% to 98%
	Triangle wave linearity	99% up to 199 KHz
	Sweep (linear / logarithmic)	Start frequency, stop frequency, and sweep step setting sweep type : up/down, up-down
	Sync output	Output level : low level < 0.6V, high level > 1V, @ 50W Frequency range : 100mHz ~ 8MHz Output impedance: 50W		Output level : low level < 0.6V@ 50W , high level > 1V, @ 50W Frequency range : 100mHz ~ 10M/20MHz Output impedance: 50W
	Model	FG 708S	FG 708F	FG 710F/720F
	Modulation characteristics
	AM		Carrier : Sine, Triangle Modulation Source Internal : 400 / 1000Hz sine waveform External : any waveform about 6.6Vp input for 100% modulation Modulation depth : 0% to 100%	Carrier : Sine, Triangle Modulation Source Internal : 400 / 1000Hz sine waveform External : any waveform @ 5.5 Vpeak Max about 6.6Vp input for 100% modulation Modulation depth : 0% to 100%
	FM		Modulation : any Internal waveform Frequency : 100mHz to 10KHz Peak deviation : 100mHz to 8MHz Modulation Source : 400 / 1000Hz sine waveform	Modulation : any Internal waveform Frequency : 100mHz to 10KHz Peak deviation : 100mHz to 8MHz Modulation Source : 400 / 1000Hz sine waveform
	FSK	Function : Sine or Square or Triangle Frequency range : 100mHz to 8MHz Internal rate : 400 / 1000Hz Source : Internal / External		Function : Sine or Square or Triangle Frequency range : 100mHz to 10MHz Internal rate : 400 / 1000Hz Source : Internal / External
	PSK	Function : Sine or Square or Triangle Frequency range : 100mHz to 8MHz Internal rate : 400 / 1000Hz Phase setting : 0.0000 to 360.0 degree Source : Internal / External		Function : Sine or Square or Triangle Frequency range : 100mHz to 10MHz Internal rate : 400 / 1000Hz Phase setting : 0.0000 to 360.0 degree Source : Internal / External
	Trigger/gate
	Trigger	Trigger Source : Manual trigger (rotary push trigger) / External trigger Main frequency setting range : 100mHz to 100KHz		Main frequency setting range : 100mHz to 100KHz
	Gate	Gate Source : Manual gate (rotary push trigger) / External gate Main frequency setting range : 100mHz to 8MHz		Gate Source : Manual gate (rotary push trigger) / External gate Main frequency setting range : 100mHz to 10M/20MHz
	Model	FG 708S	FG 708F	FG 710F/720F
	Frequency Counter
	Measuring range accuracy		Frequency range : 1Hz ~100MHz Time base error ± 5 count	Frequency range : 2Hz ~100MHz Time base error ± 5 count
	Resolution		7 1/2 digits	7 digits 0r (99.999)
	Low pass filter (LPF)		auto mode	Manual On
	Time base stability		36.864MHz ± 25 PPM (23.5°C ± 5°C)	500MHz ± 25 PPM (23.5°C ± 5°C)
	Input level attenuation		x1 , x20	0dB, -20dB
	Sensitivity		Standard ; 1Hz ~ 75MHz / -22 dbm @ 50W typical, 76M ~100MHz / -15 dbm @ 50W typical	Standard ; 2Hz ~ 50MHz / -20 dbm @ 50W typical, 50Hz ~ 80MHz / -10 dbm @ 50W typical, 80Hz ~ 100MHz / -5 dbm @ 50W typical,
	General Specifications
	Power Source: Accessories: Operation Environment: Dimension: Weight:	AC 115V / 230V (inner switch able) ±10%, 50/60Hz Instruction manual, AC power cord 0ºC to 40ºC, relative humidity below to 80%, Storage temperature -20ºC to 70ºC 280mm x 235mmx 95mm (11" x 9.25" x 3.74") (DxWxH) 3 kg

HOMEPAGE MOTECH - DOWNLOAD